hh125sdgK
Debute
Posts: 10
Status: Offline
Joined:
pm
| | China Plastic Fitting (26th Dec 22 at 11:17am UTC) | | China Plastic Fitting Description
CPVC is obtained by chlorination modification of polyvinyl chloride (PVC) resin, and is a new type of engineering plastic. The product is white or light yellow odorless, odorless, non-toxic loose granules or powder. After the PVC resin is chlorinated, the chlorine content is increased from 56.7% to 63-69%, and the chemical stability is increased, thereby improving the heat resistance, acid, alkali, salt, oxidant and other corrosion of the material. Its heat distortion temperature and mechanical properties are much higher than those of PVC. Therefore, CPVC is one of the best engineering materials for industrial piping. As a new type of pipeline, CPVC pipe has excellent corrosion resistance. The maximum operating temperature can reach 93-100鈩? which is 30-40鈩?higher than that of PVC. At the same time, it improves the chemical resistance and corrosion resistance of PVC. Chemical corrosion of strong bases, salts, fatty acid salts, oxidants and halogens. In recent years, it has been widely used in steel, metallurgy, petroleum, chemical, fertilizer, dye, pharmaceutical, electric power, environmental protection and sewage treatment industries.
Application
CPVC Flange, also known as flange flange or flange. CPVC Flange is the interconnected parts between shafts and are used for the connection between pipe ends; they are also used as flanges on the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures. Pipe flange refers to the flange used for piping in the pipeline installation, and used on equipment refers to the inlet and outlet flanges of the equipment. Any connection parts that are bolted at the periphery of two planes and closed at the same time are generally called "flanges", such as the connection of ventilation ducts, such parts can be called "flange parts". But this connection is only a part of the equipment, such as the connection between the flange and the water pump, it is not easy to call the water pump "flange parts". Smaller ones, such as valves, can be called "flange parts".China Plastic Fitting
website:http://www.ifan-plast.com/plastic-fitting/ | |
|
